Titrimetric and spectrophotometric methods for the determination of cerium(IV) in aqueous solution

A titrimetric and spectrophotometric methods for cerium(IV) determination have worked out. The first method relies upon the treatment of cerium(IV) solution with an excessive amount of iodide; the liberated iodine is extracted into chloroform, then reduced to iodide. The latter is iodometrically determined after 6- or 36-fold amplification. The spectropho-tometric finish is based upon the reaction of the titled ion with iron(II), in the presence of hexacyanoferrate(II), to form an intense prussian blue color suitable for the trace determination of cerium(IV) ion.     

Pseudoguaiane-type sesquiterpenes and inhibitors on nitric oxide production from Dichrocephala integrifolia

Three new pseudoguaiane-type sesquiterpenes, dichrocepholides A-C, and two new pseudoguaiane-type sesquiterpene dimers, dichrocepholides D and E, were isolated from the aerial part of Dichrocephala integrifolia. Their stereostructures were determined on the basis of chemical and physicochemical evidence. In addition, the extract and its principal sesquiterpene constituent, parthenin, showed an inhibitory activity on nitric oxide (NO) production and on induction of inducible NO synthase.     

Thermodynamic perturbation theory for fused sphere hard chain fluids using nonadditive interactions

A model is developed for the equation of state of fused chains based on Wertheim thermodynamic perturbation theory and nonadditive size interactions. The model also assumes that the structure (represented by the radial distribution function) of the fused chain fluid is the same as that of the touching hard sphere chain fluid. The model is completely based on spherical additive and nonadditive size interactions. The model has the advantage of offering good agreement with simulation data while at the same time being independent of fitted parameters. The model is most accurate for short chains, small values of Delta (slightly fused spheres) and at intermediate (liquidlike) densities.     

Hall effects and entropy generation applications for peristaltic flow of modified hybrid nanofluid with electroosmosis phenomenon

The electroosmotic peristaltic flow of modified hybrid nanofluid in presence of entropy generation has been presented in this thermal model. The Hall impact and thermal radiation with help of nonlinear relations has also been used to modify the analysis. The assumed flow is considered due to a non-uniform trapped channel. The properties of modified hybrid nanofluid model are focused with interaction of three distinct types of nanoparticles namely copper ($Cu)$, silver ($Ag$) and aluminum oxide ($A{l}_2{O}_3).$ The mathematical modeling and significances of entropy generation and Bejan number are identified. With certain flow assumptions, the governing equations are attained for optimized peristaltic electroosmotic problem. Widely used assumptions of long wave length and low Reynolds number reduced the governing equations in ordinary differential equations. The ND solver is flowed for the solution process. The physical significant of results is observed by assigning the numerical values to parameters.     

Retention of alkali,alkaline earth and transition metals on an itaconic acid cation-exchange column. Eluent pH,ionic strength and temperature effects upon selectivity

The unusual selectivity of a methylene succinic (itaconic) acid modified polymeric column was investigated for the separation of alkali, alkaline earth, transition and heavy metals employing non-chelating inorganic eluents. The retention of selected metal ions on the column was investigated with simple HNO3 eluents and eluents prepared from KNO3 and KCl salts of varying pH (adjusted using HNO3). From these studies both the effect of eluent ionic strength and pH upon retention was evaluated for the itaconic acid stationary phase. The results obtained showed that despite slow exchange kinetics causing poor efficiencies, acceptable baseline separations of selected alkaline earth and transitions could be obtained under optimum conditions (the baseline separation of Mg(II), Ca(II), Mn(II), Cd(II), Zn(II) and Co(II) was possible using a 15 mM KNO3-5 mM KCl eluent at pH 3.50 in under 25 min). The use of an simple ionic strength step gradient was shown that facilitated the addition of Pb(II) to the above group of metal ions. An investigation into the effect of temperature upon peak efficiency and retention showed increased column temperature could be used to improve the resolution of closely eluting metal ions such as Ca(II) and Sr(II) and Ca(II) and Mn(II).     

Decomposition of Triethylamine Over Acid Catalysts

The effect of hydrochloric acid, boric acid, and silica content in alumina on its catalytic activity towards the decomposition of triethylamine was investigated at 310°, 320°, and 330°. The study was carried out in a flow system and the reaction product was analyzed chromotographically. Ethylene formation is a zero order reaction independent of the partial pressure of triethylamine. Treating γ-alumina with hydrochloric acid increases its catalytic activity towards ethylene formation whereas silica-alumina is less active than γ-alumina. Boric acid-treated alumina has the same activity of γ-alumina. Formation of ethylene from preadsorbed triethylamine was studied. The similarity between reactions of aliphatic alcohols and amines over acid catalysts is concluded.     

Über Pterinchemie. 68 Mitteilung [1]. Regiospezifische Deuterierungen von Folsäure

Regiospecific deuteriation of folic acid Introduction of a nitroso function at the N (10)-position of folic acid activates the C(9)-hydrogen atoms in such a way, that the exchange of H with D at this position, in NaOD-solution, is extremely facilitated. This fact is utilized in the synthesis of 9,9-dideuterio-folic acid (IV), 7,9,9-trideuterio-folic acid (VII) and 7-deuterio-folic acid (IX). These three products are necessary for the ¹H-NMR.-spectroscopical determination of the conformation of 5,6,7,8-tetrahydrofolic acid and its derivatives.     

Chemical composition and antimicrobial activity of the essential oils of Ferula latisecta and Mozaffariania insignis from Iran

The hydrodistilled oils from the aerial parts of Ferula latisecta and Mozaffariania insignis, which is endemic to Iran, were analyzed by GC and GC/MS. (Z)-Ocimenone (32.4%), (E)-ocimenone (20.3%), and cis-pinocarvone (11.4%) were the main components among the 22 constituents characterized in the oil of F. latisecta, representing 87.7% of the total components detected. Twenty-five compounds were identified in the oil of M. insignis, representing 99.0% of the total oil, with octyl acetate (41.1%), β-pinene (30.3%), and α-pinene (23.9%) as the main constituents. The essential oils were examined for their potential antimicrobial activities. Published in Khimiya Prirodnykh Soedinenii, No. 6, pp. 561–563, November–December, 2006.     

Melt drawing as a route to high performance polyethylene

Well established routes for obtaining stiff and strong polyethylene (PE) involve solid state drawing either of solution crystallized gel films or melt crystallized spherulitic PE. The aim of this work is to show the potential of melt deformation as an alternative route for obtaining highly oriented products. Our previous work on the melt deformation route showed that oriented PE fibers could be directly extruded under appropriately controlled conditions [8,9]. Here, we show that PE films (or filaments) can also be melt drawn in the temperature window 130–160 °C, thus yielding oriented products. The advantage of melt drawing over direct melt extrusion is that it allows a wider operational latitude and thus does not require such carefully controlled conditions.The morphology produced by melt deformation is different from solid state deformation and consists of extended chain fibrils with platelet overgrowths. The relative amount of fibrils and platelets depends on operating parameters. The temperature window of PE melt drawing is identified with the regime where some flow induced crystallization takes place. The conditions for melt drawability are of wider generality for crystallizable flexible chain polymers. They are: (i) adequate strain rate to overcome entropie resistance to chain extension, (ii) but not high enough to activate the elastic response of the transient networks in the entangled system, (iii) sufficient strain to fully extend the chain, (iv) appropriate temperature for flow-induced crystallization and strain hardening, and (v) cooling to freeze the oriented structure.Ultra high molecular weight PEs were not the most suitable for melt drawing due to their high recoverable elongation in the melt (melt elasticity) in addition to added limitations imposed by their nascent grain systeme. Our work suggests that an optimum molecular weight for melt drawing is¯M _w(400–900)×10³ with further possibilities for improvement through multimodal distributions.     

Computational complexity of LCPs associated with positive definite symmetric matrices

Murty in a recent paper has shown that the computational effort required to solve a linear complementarity problem (LCP), by either of the two well known complementary pivot methods is not bounded above by a polynomial in the size of the problem. In that paper, by constructing a class of LCPs—one of ordern forn 2—he has shown that to solve the problem of ordern, either of the two methods goes through 2 ⁿ pivot steps before termination.However that paper leaves it as an open question to show whether or not the same property holds if the matrix,M, in the LCP is positive definite and symmetric. The class of LCPs in whichM is positive definite and symmetric is of particular interest because of the special structure of the problems, and also because they appear in many practical applications.In this paper, we study the computational growth of each of the two methods to solve the LCP, (q, M), whenM is positive definite and symmetric and obtain similar results.This research is partially supported by Air Force Office of Scientific Research, Air Force Number AFOSR-78-3646. The United States Government is authorized to reproduce and distribute reprints for governmental purposes notwithstanding any copyright notation thereon.